Search the Daily

Published Jun 10, 2024

There are many ways to make texture on pottery, and making custom clay texture tools is great because it really personalizes your work. We have posts in the Ceramic Arts Network archives on making pottery texture boards for slab building and making clay texture rollers. But those are clay texture tools for handbuilding primarily.

Today, we are sharing a clay texture tool for freshly thrown work. In this post, an excerpt from the Pottery Making Illustrated archive, Matthew Krousey explains how he makes pottery texture paddles from scrap wood with few tools. - Jennifer Poellot Harnetty, editor

PS. To learn how Matthew Krousey uses these paddles to whap texture onto his pots, check out the January/February 2018 issue of Pottery Making Illustrated!


I have always admired images of ancient vessels from Japan and Korea that were constructed and decorated using paddles. Wanting to diversify my approach to decorating my own work, I recently started using wooden paddles with various geometric patterns carved into the surface. Removing myself from my usual multi-step process of layering and illustrating with glazes, this method gives me the opportunity to work simply with the raw clay. After testing various clays bodies, I found that a plastic porcelain body with a smooth buttery surface was most suited to paddling.

 

1 Draw the desired shape of the paddle on a scrap piece of plywood. Use a jigsaw to cut out the paddle shape.2 Use a Dremel tool with a cutting bit to carve geometric patterns into pre-cut paddles.

Cutting Paddles and Patterns

Tools needed to construct the paddles include: a jigsaw, a Dremel rotary tool with a cutting bit, scrap wood, a pencil, and paper. For wood, I used ½-inch-thick scrap plywood (any scrap will do) leftover from building shelves and bats. I like the rough-sided plywood because of the depth it adds as a subtext to the patterns carved into the paddles.

3 Place one hand on the inside of a leather-hard pot for support, then paddle the exterior of the pot to alter its surface.To make a simple stencil, fold a piece of paper in half and draw an outline of a paddle that is sized to suit your pots and a handle that will fit nicely in your hands. Trace the cutout of the paddle onto the wood and use a jigsaw to cut it out (1). Finally, use a Dremel tool equipped with a cutting bit to carve out a pattern. The Dremel is a tool I always have handy in my studio because of its versatility; for this purpose, I like the roughness and inconsistencies I can achieve in the wood surfaces by cutting freehand. This translates to a more unique and rustic pattern on the surface of the pot. The geometric patterns I’ve chosen are a reflection of old wire farm fencing (2). These images have nostalgic value to me as they invoke memories from my childhood. To avoid distortion especially in smaller pots, brace the interior of the pot with your fingers when making contact with the paddle (3).

*First published in 2018.
Unfamiliar with any terms in this article? Browse our glossary of pottery terms!