Plates can be tough to keep flat, but controlled drying with light compression can help to keep wonky waves at bay. These sewn plate weights are simple to make, customizable, and made from upcycled/recycled materials.
Plates are always tricky to make. They crack, they warp, they do everything they are not supposed to do! In order to prevent plates from warping, I have started using self-made weight bags. In addition to tricks such as evenly rolling out the clay, compressing it, and letting it dry slowly, plate weights have worked wonders for my slab-built plates. They compress the plate during the drying process, keeping it flat and further preventing cracks.
Creating Your Own Weights
Moreover, you can make your own weight bags using recycled materials. Mine, for example, were sewn from a cast-off cotton duvet cover. Simply cut out two circles in the desired size and sew them together (1), leaving an opening of roughly 2 inches (5 cm). Turn the piece right side out (2) and fill it with sand (3). They can also be filled with rice, beans, or clean cat litter. Lastly, close the opening by hand using a ladder stitch (which will be invisible) (4), or use a sewing machine for an easy (but visible) closing (5). Lay the weight on plates as they dry (6).
Tips: Use a straight stitch setting with very short stitches, so that no sand trickles through. Also, make sure your fabric is tightly woven—I first used a rather cheap fabric, which let the fine sand seep through. Of course, your plate weights don’t have to be round in shape but could be oval, square, triangular, you name it!
the author Mascha Lange is a ceramic artist and educator based in Leipzig, Germany. Under her label mala, she creates slab-built functional pottery finished in vibrant, expressive glazes. To see more of her work, including behind-the-scenes process posts and new pieces, visit Instagram @malapottery.
We understand your email address is private. You will receive emails and newsletters from Ceramic Arts Network. We will never share your information except as outlined in our privacy policy. You can unsubscribe at any time.
Please enjoy this complimentary article for the month.
For unlimited access to Ceramics Monthly premium content, please subscribe.
We understand your email address is private. You will receive emails and newsletters from Ceramic Arts Network. We will never share your information except as outlined in our privacy policy. You can unsubscribe at any time.
Subscribe to Ceramics Monthly
Plates can be tough to keep flat, but controlled drying with light compression can help to keep wonky waves at bay. These sewn plate weights are simple to make, customizable, and made from upcycled/recycled materials.
Plates are always tricky to make. They crack, they warp, they do everything they are not supposed to do! In order to prevent plates from warping, I have started using self-made weight bags. In addition to tricks such as evenly rolling out the clay, compressing it, and letting it dry slowly, plate weights have worked wonders for my slab-built plates. They compress the plate during the drying process, keeping it flat and further preventing cracks.
Creating Your Own Weights
Moreover, you can make your own weight bags using recycled materials. Mine, for example, were sewn from a cast-off cotton duvet cover. Simply cut out two circles in the desired size and sew them together (1), leaving an opening of roughly 2 inches (5 cm). Turn the piece right side out (2) and fill it with sand (3). They can also be filled with rice, beans, or clean cat litter. Lastly, close the opening by hand using a ladder stitch (which will be invisible) (4), or use a sewing machine for an easy (but visible) closing (5). Lay the weight on plates as they dry (6).
Tips: Use a straight stitch setting with very short stitches, so that no sand trickles through. Also, make sure your fabric is tightly woven—I first used a rather cheap fabric, which let the fine sand seep through. Of course, your plate weights don’t have to be round in shape but could be oval, square, triangular, you name it!
the author Mascha Lange is a ceramic artist and educator based in Leipzig, Germany. Under her label mala, she creates slab-built functional pottery finished in vibrant, expressive glazes. To see more of her work, including behind-the-scenes process posts and new pieces, visit Instagram @malapottery.
March 2026: Table of Contents
Must-Reads from Ceramics Monthly
Unfamiliar with any terms in this article? Browse our glossary of pottery terms!
Click the cover image to return to the Table of Contents