I am currently working on a new series where I create detailed designs out of abstract watercolor brushstrokes. Most of the finished pieces end up with creatures resembling actual animals, but once in a while, I make a weird, unknown creature, and that gives me a little zap of creative energy.
Creating a Canvas
I use Plainsman Polar Ice porcelain, which responds wonderfully to soft colors. I throw all my forms on the wheel, altering and adding tinted porcelain (which I mix myself) parts to the thrown surface.
After throwing a form, use a metal rib to smooth the outside of the piece so the Mason stain wash will brush on smoothly. Once the pieces are bone dry, clean them with a fine sponge to remove any fingerprints or slight imperfections that the brushed stains could pick up. Allow the piece to dry, but do not bisque fire it.
Color Prep
Next, plan what colorways you’d like to try. I look at previous work to see what I might like to try again, as well as ideas for new experiments. I try to keep some looseness in my planning and execution to allow new ideas to flow.
I mix my own Mason Stain Wash (see recipe below). Fill small containers of underglaze and Mason Stain Wash just deep enough to dip a full brush into, so you don’t have to toss out too much when the colors get muddy. I let the stains mostly settle, so I have thicker and thinner parts to work with; a little stain goes a long way.
Watercolor Brushstrokes
I brush the pieces at the bone-dry stage, when the clay absorbs color the best, and I use a mop brush to apply the color. First, dip the entire brush in one slightly thinned underglaze or stain, then half again in another thicker underglaze (1). This creates a subtle variegated color pattern (2). To get the watercolor effect, it is important that the brush be fully saturated so that the stroke does not become dry. For some strokes, I dip the brush fully in the first color, either thinned underglaze or thin stain, and then add thicker underglaze or stain to the edges of the brush with a knife (3). The thicker underglaze comes first and the base color is released later (4). I then dip the brush into another color for the next stroke.
I do not wash my brush between all applications, so there is always the ghost of the colors from the last stroke, especially with dark blues and greens (5). I have to be sure to work my colorways in series that do not get too muddy too quickly.
Do not use too many strong complementary colors together, or else you just end up with brown. Once the color becomes muddy, wash your brush and start again. When I work with a complementary color combo like yellow and purple, it has to be done alone. I will start with a clean brush, dip it in a purple stain, add yellow underglaze (6), and then pull the brush stroke just once (7). When I finish the stroke, I wash my brush before starting again.
After you’ve painted all the pieces with the mop brush, come back in with a small brush to add fine details, either with black slip or colored stains (8).
Adding Luster
I bisque fire my decorated pieces to cone 06 and glaze fire them in oxidation to cone 5 with a clear glaze. The glaze softens the watercolors and highlights the variation in color.
Then, I stare at my colorful abstract pieces until I start to see shapes and creatures emerge. I outline them with a gold luster pen (9). Caution: Wear a mask and make sure there is good ventilation when applying and firing lusters.
I fire the pieces a final time to cone 018. My favorite is when it all comes together and something new and weird is born. I am happiest when I am surprised by what I’ve made.
Photos: Zsofin Sheehy.
Sarah Leckie is a ceramic artist working primarily with porcelain. She holds a BA from the University of Victoria and studied ceramics at the Kootenay School of the Arts. She has been an artist-in-residence at the Banff Centre, the Klondike Institute of Arts and Culture, the James Black Gallery, and The Pottery Workshop in Jingdezhen, China. Her work has been shown in galleries both locally and internationally. She is a founding member of the Victoria Mud League and currently maintains a full-time studio practice on Hornby Island, British Columbia. You can find her on Instagram @sarahleckieceramicsor on her website sarahleckie.com.
We understand your email address is private. You will receive emails and newsletters from Ceramic Arts Network. We will never share your information except as outlined in our privacy policy. You can unsubscribe at any time.
Please enjoy this complimentary article for the month.
For unlimited access to Pottery Making Illustrated premium content, please subscribe.
We understand your email address is private. You will receive emails and newsletters from Ceramic Arts Network. We will never share your information except as outlined in our privacy policy. You can unsubscribe at any time.
Subscribe to Pottery Making Illustrated
Creating a Canvas
I use Plainsman Polar Ice porcelain, which responds wonderfully to soft colors. I throw all my forms on the wheel, altering and adding tinted porcelain (which I mix myself) parts to the thrown surface.
After throwing a form, use a metal rib to smooth the outside of the piece so the Mason stain wash will brush on smoothly. Once the pieces are bone dry, clean them with a fine sponge to remove any fingerprints or slight imperfections that the brushed stains could pick up. Allow the piece to dry, but do not bisque fire it.
Color Prep
Next, plan what colorways you’d like to try. I look at previous work to see what I might like to try again, as well as ideas for new experiments. I try to keep some looseness in my planning and execution to allow new ideas to flow.
I mix my own Mason Stain Wash (see recipe below). Fill small containers of underglaze and Mason Stain Wash just deep enough to dip a full brush into, so you don’t have to toss out too much when the colors get muddy. I let the stains mostly settle, so I have thicker and thinner parts to work with; a little stain goes a long way.
Watercolor Brushstrokes
I brush the pieces at the bone-dry stage, when the clay absorbs color the best, and I use a mop brush to apply the color. First, dip the entire brush in one slightly thinned underglaze or stain, then half again in another thicker underglaze (1). This creates a subtle variegated color pattern (2). To get the watercolor effect, it is important that the brush be fully saturated so that the stroke does not become dry. For some strokes, I dip the brush fully in the first color, either thinned underglaze or thin stain, and then add thicker underglaze or stain to the edges of the brush with a knife (3). The thicker underglaze comes first and the base color is released later (4). I then dip the brush into another color for the next stroke.
I do not wash my brush between all applications, so there is always the ghost of the colors from the last stroke, especially with dark blues and greens (5). I have to be sure to work my colorways in series that do not get too muddy too quickly.
Do not use too many strong complementary colors together, or else you just end up with brown. Once the color becomes muddy, wash your brush and start again. When I work with a complementary color combo like yellow and purple, it has to be done alone. I will start with a clean brush, dip it in a purple stain, add yellow underglaze (6), and then pull the brush stroke just once (7). When I finish the stroke, I wash my brush before starting again.
After you’ve painted all the pieces with the mop brush, come back in with a small brush to add fine details, either with black slip or colored stains (8).
Adding Luster
I bisque fire my decorated pieces to cone 06 and glaze fire them in oxidation to cone 5 with a clear glaze. The glaze softens the watercolors and highlights the variation in color.
Then, I stare at my colorful abstract pieces until I start to see shapes and creatures emerge. I outline them with a gold luster pen (9). Caution: Wear a mask and make sure there is good ventilation when applying and firing lusters.
I fire the pieces a final time to cone 018. My favorite is when it all comes together and something new and weird is born. I am happiest when I am surprised by what I’ve made.
Photos: Zsofin Sheehy.
Sarah Leckie is a ceramic artist working primarily with porcelain. She holds a BA from the University of Victoria and studied ceramics at the Kootenay School of the Arts. She has been an artist-in-residence at the Banff Centre, the Klondike Institute of Arts and Culture, the James Black Gallery, and The Pottery Workshop in Jingdezhen, China. Her work has been shown in galleries both locally and internationally. She is a founding member of the Victoria Mud League and currently maintains a full-time studio practice on Hornby Island, British Columbia. You can find her on Instagram @sarahleckieceramics or on her website sarahleckie.com.
September/October 2025: Table of Contents
Must-Reads from Pottery Making Illustrated
Unfamiliar with any terms in this article? Browse our glossary of pottery terms!
Click the cover image to return to the Table of Contents