Slip and Stick: How to Use Stained Slips and Newsprint to Make Monoprints on Pottery

Learn how to use newsprint to transfer images on clay!

Monoprints on Pottery
I love the surfaces of Jason Bige Burnett’s pots. They remind me of the Sunday newspaper cartoon transfers I (and probably a lot of you out there) used to do with Silly Putty® as a child. Interestingly enough, Jason uses a transfer technique involving newspaper (but not Silly Putty®) to make some of the marks on his surfaces.
In today’s post, an excerpt from the Pottery Making Illustrated archives, Jason shares this super fun technique. Enjoy! – Jennifer Poellot Harnetty, editor.

My childhood interest in television cartoons influenced my current ceramic forms and surfaces. The bright colors, graphic patterns, and illustrative qualities recapture and celebrate my fascination with whimsical domestic representation. I’m inspired by the stylized hand-drawn utilitarian objects like a coffee mug in a cartoon character’s hand or the mixing bowl displayed on the shelf in their kitchen. I hope to continue that sense of wonder through real physical objects.

The combination of commercial stained slips and newsprint paper create a stick-and-peel process. By applying underglazes and slips saturated with bold colors onto newsprint and then transferring the drawn images to a slipped clay object, I can achieve an animated surface. Playtime doesn’t end there; I continue by introducing stamps, stains, and stickers to further enhance the ceramic surface until the desired effect is fully achieved.

Five Great Decorating Techniques

Make surfaces that stand out when you download this freebie, Five Great Decorating Techniques.


Creating Newsprint Transfers

Monoprints on Pottery

figure 1.

The process I’m using is equivalent to making a monoprint in traditional printmaking Instead of drawing on a metal plate and transferring the image to paper, I’m drawing on newspaper, then transferring to clay. As with all monoprints, keep in mind that the image you create will be reversed. Text must be backwards and layers of color must be applied foreground to background (figure 1).

Whether it be stripes, shapes, illustrations, or a color field, start with an idea of how you would like to approach the surfaces of your piece before you start. Apply your pattern or drawing to strips or blocks of newsprint varying the colors of slip using brushes, slip trailers, and sponge stamps. Use caution as the paper causes the slip to dry – if it dries too much it may chip off. Use a spray bottle to keep the image damp but don’t spray too much water, which could puddle and smear the slip. The local newspaper works well but I prefer using newsprint pads from any art supply store. The thickness and tooth of this paper is durable and tough enough to hold and transfer slip.

Slip it and Stick it

Monoprints on Pottery

figure 2.

After you’ve completed the newsprint image, wait for the slip or underglaze to become leather hard and then apply a slip coat over the drawing. Lightly dab the first coat of slip on (figure 2), wait for this coat to become leather hard and then brush on a second coat. A hair dryer assists in getting the slipped newsprint to leather-hard. If the slip has a glossy shine then it’s too wet to continue.

The slip application works best on leather-hard clay. Using a hake brush, apply a moderate coat of slip to the surface of your piece. This layer of slip shouldn’t be too thin or too thick and the slip should be the consistency of heavy whipping cream. This slip coat creates a tactile surface perfect for pressing newsprint into and absorbs transferred slip and imagery well.

When the slip-coated clay piece and the slip decoration on the newsprint are both at leather hard, you are ready to print. There is a narrow window of time here where the surface of your object and the newspaper are perfect for application. If one or the other is too wet when applied, the result could be sloppy and undesirable. If the image and/or object are too dry then this affects the quality of adhesion during the transfer process. When the slip on the object softens and all the slip on the paper has lost its sheen, you’re ready to transfer the image.

Monoprints on Pottery

figure 3.

Carefully pick up your piece of newsprint and slowly bring it towards the object. You’ll see the image through the newsprint and that assists with placement. Once any part of the newsprint transfer touches the object, gently press the rest of the newsprint onto the surface (figure 3). Note that air pockets result on curved surfaces. These are addressed after the pressing. Softly press the newsprint transfer onto the surface with your hands, working over the general area. The trapped air pockets can be removed by piercing them with a needle tool or a small X-Acto blade. If the air pockets are not taken care of, they can cause defects or misprintings of the transfer.

Now that the newsprint has been applied to the object, there’s a layer of moisture trapped between the object and the paper. Within the first minute or two the clay object begins absorbing that moisture.

Monoprints on Pottery

figure 4.

Using a soft rib, press the newsprint down, applying more pressure than before. Between thirty seconds and two minutes is about the time when you’ll notice the newsprint drying out again. Now take a slightly harder rib and, with more force than before, rub the newsprint one last time into the clay. Rubbing too hard could smudge the slip underneath or tear through the paper. Practice and experience with this method is the best way to find your limits.

Grab a corner or take the edge of the newsprint and slowly begin to peel away (figure 4). It’s important to do this slowly so you’ll catch the spots that did not adhere to the surface. Just place it back down gently and with the medium-soft rib, massage the spot down into the surface. Repeat if necessary. Not addressing the spots creates potential reservoirs for stain and glazes later. Now that your image is transferred, handle the piece carefully. Applying slip onto leather-hard clay will make the clay soft and malleable again. I suggest waiting until your piece becomes firm and the surface slip isn’t sticky to the touch before applying anything else to the surface.

To learn more about Jason Bige Burnett or see more images of his work, please visit

**First published in 2011.
  • Does this method work on ceramic paper clay objects? I want to apply designs to my dry pieces made of Ceramic Paper Clay. I plan to spritz the pieces with water first and cover them in plastic wrap for several hours prior to applying the slipped newsprint.

  • Today (06 April 2012) I saw first part of the Video –Screen Printing Colored Slips Onto Newsprint to Make Monoprints on Pottery– demonstrated by Jason Bige Burnett that Jennifer shot It was too good. In that article I was referred to this one. and putting those together they make a great fun to learn the tech. Its realty marvelous!!

  • Brenda W.

    I know this is going to sound amateur, but I’m fairly new to pottery and already I love working with slip…specifically on sgraffito. However, the slip I’m using is made by my instructor in studio. So, I’m wondering…can I use an underglaze instead of slip? I haven’t mixed my own slip to date and I’m wondering if using an premixed underglaze would give you the same effects? I love the colours of the Amaaco underglazes and would be really interested in any feedback anyone can give me.

    Thanks so much!

  • Bel you can buy or even get free, non inked newsprint. If you go to any newspaper printer they have lots of, end bolts, that they can’t use and they usually give them away for free! Also using that roll of newspaper is great for putting down on a surface to keep it clean when working with something messy! Kids love to draw on it and you can even use it to cover an entire table with at diner!

  • I love the idea – and your website, fantastic, I cant wait to try it out, what an ingenious idea. thanks for sharing Natalie OPerth W.A.

  • Thanks for this great post, just wondering…can you use normal newspaper or will that leave an ink mark – the picture above looks like some sort of transfer paper???

  • thankyou IS THERE ANY CHANCE OF A VIDEO OF THIS PROCESS it would be realy good to follow this up with one thankyou lots of good tips and ideas when one needs inspiration cant get enough of it ille have a bucket load.

  • Laura D.

    Thank you so much for sharing your techniques. I am new to the world of ceramics…I have been a print maker for many years so I can’t wait to practice and apply to clay.. your work is fantastic!

  • Gerald L.

    I had attempted this technique 4 or 5 years ago, and now, thanks to this article and Mr. Burnett I think I see what my mistake was. Can’t wait for work to end.

  • Lindsay P.

    His website is def worth checking out…it’s like vintage circus comic book whimsy!

  • I think if you google Jason’s web page, you will see why – this is a very simple illustration of how to do this technique – he clearly takes things to a much higher level, with graphic images and screen printing etc, that would make it difficult to apply directly onto the clay.

  • Liesbeth D.

    I have been playing around a bit with this technique this summer, and I found the results more graphic than painting directly on your pot. It gives a different feel to the “clay skin”. It is also very exiting, every transfer brings surpises (at least, for me, my timing isn’t perfect yet) and the irregularities give it a nice touch.

  • Brenda W.

    Nice explanation of the technique. Since it is a monoprint, why is this method preferable to direct painting on the leather hard clay?

Leave a Reply

You must be logged in to post a comment.

Enter Your Log In Credentials
This setting should only be used on your home or work computer.

Larger version of the image
Send this to a friend