To help keep my studio clean, I took a trip to my local home improvement store, bought $18 worth of snap-together plastic gutter parts, and spent an hour at home adding a scrap trap to my work table. To make one for yourself, you’ll need two end caps, one length of gutter cut (with a saber saw) to fit your table, one downspout fitting, and one downspout (1).

1 Parts from left to right: endcap, downspout fitting with a downspout, section of gutter, endcap.2 Wooden L bracket screwed to the bottom edge of a work table. The trap is screwed to the longer, front face of the bracket.

First, you will need to make a bracket to attach the gutter trap to your work table (2). I glued and screwed two scrap pieces of wood together in an L shape. This L bracket was made the same length as the gutter to support it in its entirety. The short side of the L bracket is screwed to the bottom side of the work table and the long side faces out to support the gutter. Simply use some small screws to attach the gutter to the supporting face of the L bracket (see 4). Assemble the gutter as shown in the photo and secure it to the table. Then, use silicone to seal all the seams to prevent future leaks when wet cleaning. Get yourself a pail, squeegee, and a sponge (3, 4), and your scrap trap table is complete. I always find a clean studio space invites me to work!

3 A window squeegee works great to move scrap material to the trap.4 Completed scrap trap with a collection bucket.
Topics: Making Clay Tools

Related Content