After doing some touch-up painting in my kitchen, I realized that the mini paint roller I had been using would make a super easy sponge-on-a-stick tool to help reach into narrow or tall thrown pots.
For the prototype, I took a MacGyver approach; I jammed the roller sponge onto a paint brush handle (1), dipped it into water, squeezed it out, and it was good to go! This did the trick for a while, but I wanted a longer handle than that of my paint brush.
For the second version, I used a 16-inch length of ¼-inch hardwood dowel and added a generous dollop of waterproof adhesive (E6000) to permanently attach the roller to the handle (see 2). The mini paint rollers have a plastic insert with a collar approximately 1 inch down that keeps the adhesive from running too far into the roller.
The high-density sponge rollers I used were from a dollar store and came 2 in a pack for $1.50. I have experimented with more expensive rollers, but they don’t work any better than the inexpensive ones. The standard roller size is 4×1¼ inches, but there are shorter and narrower ones available. Measure the inside diameter of the plastic insert to determine the dowel size you will need. Like all sponges, these need to be wetted then squeezed out to work well (3, 4). Both versions work brilliantly, and the cost and time spent making them is minimal, which is a welcome bonus.
We understand your email address is private. You will receive emails and newsletters from Ceramic Arts Network. We will never share your information except as outlined in our privacy policy. You can unsubscribe at any time.
You have read of of your complimentary articles for the month.
For unlimited access to Ceramics Monthly premium content, subscribe right now for as low as $4.85/month.
We understand your email address is private. You will receive emails and newsletters from Ceramic Arts Network. We will never share your information except as outlined in our privacy policy. You can unsubscribe at any time.
Subscribe to Ceramics Monthly
After doing some touch-up painting in my kitchen, I realized that the mini paint roller I had been using would make a super easy sponge-on-a-stick tool to help reach into narrow or tall thrown pots.
For the prototype, I took a MacGyver approach; I jammed the roller sponge onto a paint brush handle (1), dipped it into water, squeezed it out, and it was good to go! This did the trick for a while, but I wanted a longer handle than that of my paint brush.
For the second version, I used a 16-inch length of ¼-inch hardwood dowel and added a generous dollop of waterproof adhesive (E6000) to permanently attach the roller to the handle (see 2). The mini paint rollers have a plastic insert with a collar approximately 1 inch down that keeps the adhesive from running too far into the roller.
The high-density sponge rollers I used were from a dollar store and came 2 in a pack for $1.50. I have experimented with more expensive rollers, but they don’t work any better than the inexpensive ones. The standard roller size is 4×1¼ inches, but there are shorter and narrower ones available. Measure the inside diameter of the plastic insert to determine the dowel size you will need. Like all sponges, these need to be wetted then squeezed out to work well (3, 4). Both versions work brilliantly, and the cost and time spent making them is minimal, which is a welcome bonus.
Unfamiliar with any terms in this article? Browse our glossary of pottery terms!
Click the cover image to return to the Table of Contents