Ingredients

Ingredient Amount
Gerstley Borate 50.00
Nepheline Syenite 16.67
Alumina Hydrate 33.33
Add Amount
Iron Chromate 12.50

Instructions

To achieve a textured green gray like the surface on the rhino, I use a combination of this stain recipe and commercial underglazes and glazes. To create this surface, apply these layers in order: Dark Gray Amaco underglaze, Adrian Arleo's Dark Blue Sand Dry Stain wash, Laguna MS-35 Sage glaze, Laguna MS-46 Agate glaze.

The 5-segment slow-cooling firing schedule I use for my glazes is as follows:

Segment 1: 150°F per hour up to 1200°F.

Segment 2: 200°F per hour up to 2000°F.

Segment 3: 150°F per hour up to 2150°F, with a 15 minute hold at top temperature.

Segment 4: cooling 500°F per hour down to 2000°F, with a 15 minute hold.

Segment 5: Cooling 125°F per hour down to 1400°F. Then the kiln is allowed to cool on its own to ambient temperature.

This recipe was shared by Ariel Bowman in the May 2019 issue of Ceramics Monthly.

Create your own Recipes!

You can keep your recipes private or share with others.

Create a Recipe

Manage your Recipes