Ingredients

Ingredient Amount
Water (in parts) 2.00
Grolleg Kaolin (in parts) 1.00
Sodium Silicate or Darvan 7 0.25
Add Amount
Cobalt Carbonate (in tsp per cup sigillata) 0.13

Instructions


Mix 1 part clay to 2 parts water, blend well with drill mixer. Add 0.25–0.5% (of the dry weight of the clay) of a deflocculant (sodium silicate or Darvan 7), then drill mix again. Allow heavier clay (red clay) terra sigillatas to settle for at least 6–8 hours, and lighter clays/ball clays to settle for 24–48 hours. After the mixture has settled into distinct layers, siphon out the middle section of the mixture. This is the terra sigillata. Add colorant per 1 cup mixed terra sigillata.

Note: Terra sigillata does not seal a surface once it is fired and therefore is not safe to use on surfaces that will come in contact with food or beverages. Consider additional glaze applications and liner glazes to create food-safe surfaces.

This recipe was shared by Rhonda Willers in the September/October 2020 issue of Pottery Making Illustrated.

Create your own Recipes!

You can keep your recipes private or share with others.

Create a Recipe

Manage your Recipes