Using Glaze Additives Like CMC Gum to Make Average Glazes Great

Using Additives Such as CMC Gum to Beef up your Glazes

CMC Gum Ceramic Glaze Additives

Sometimes the glazes we use are good for one purpose, but not so good for another. A glaze might perform well when dipping or pouring, but dry so quickly when brushed that it’s nearly impossible to get an even coat. Ceramic glaze additives are the secret ingredients that can help remedy these problems.

CMC gum is a ceramic glaze additive that can be used to help improve brushability in glazes that are mixed for dipping. Not only can CMC gum help improve brushability, but it can also help potters get better results when stamping glazes. In today’s post, an excerpt from her video Mix & Match: Surface Techniques (a follow up to Mix & Match: Forming Techniques), Brenda Quinn explains how to add CMC powder to glazes to get great stamped surface effects. We also included a Pottery Making Illustrated archive post in which our own Jessica Knapp puts some other ceramic glaze additives to the test. –Jennifer Poellot Harnetty, editor.


This clip was excerpted from Mix & Match: Surface Techniques with Brenda Quinn, which is available in the Ceramic Arts Network Shop.

Getting the Most out of Ceramic Glazes and Underglazes

Dive into the world of ceramic glazes, underglazes, and stains when you download this freebieGetting the Most out of Ceramic Glazes and Underglazes.



Using Additives Such as CMC Gum to Beef up your Glazes

by Jessica Knapp

Glaze additives are the secret ingredients that make average glazes great. Sometimes the glazes we use are fine for one application method, but disappointing for others. A glaze might perform well when dipping or pouring, but dry so quickly when brushing that your brush sticks to the pot. Commercial glazes might have the opposite problem, brushing easily, but having a consistency that’s too thick for pouring or dipping applications.

CMC Gum Ceramic Glaze Additives 2There are several glaze additives that help solve these various shortcomings, by conditioning your glazes for brushing, dipping, or pouring. They fall into the categories of suspenders and binders. According to Dave Pier (a ceramic artist who is well versed on glaze additives and has even developed one), most glaze additives do a little of both, fixing suspension problems while also enhancing the bond between bisque ware and the raw glaze. Some, like CMC Gum, Magma, and Spectrum Brushing Media, are organic, while others, like Spectrum Suspender, bentonite, Veegum-T, and Bentone MA/Macaloid, are clay-like materials. Spectrum’s Glaze Thinner is a sodium hexamethaphosphate solution, and Apt-II Ceramic Enhancer is an acrylic emulsion additive. The organic materials and products are great binders, and also help with suspension. They need to be used in small glaze batches, or if added to larger ones, a preservative needs to be added as well to prevent them from rotting. The materials listed are best at keeping a glaze in suspension, but also help somewhat in binding.

Ceramic Glaze Additives Testing Methods

CMC Gum Ceramic Glaze Additives 3To test various additives, I used a transparent clear base glaze to which I added different Mason stains as colorants to differentiate each one. For the manufactured liquid products, I followed the instructions on the label for how much to add to a specific volume of already mixed glaze. For the dry materials, I used 20 grams of suspender/binder added to 100 ml (100 grams) of water. I allowed the dry material to absorb the water overnight, then mixed it thoroughly. I added it to the glaze at a volumetric ratio of 1 part binder to 8 parts glaze. Some suspenders are more potent than others, so as a general rule use between 0.5% and 2% by weight (of the dry ingredients). Testing is key for figuring out the ratios that work best. For really small quantities of glaze, add the suspender by the drop until it has the desired consistency.

Ceramic Glaze Additives for Brushing

Bentonite and Veegum-T are not as beneficial for brushing applications as they don’t really change the rate at which the glaze dries. The brush still tended to stick and drag across the surface. CMC Gum, Apt-II, Spectrum Brushing Media, and Magma all improved the glaze’s brushability. They slow the drying time, allowing for more movement of the glaze before it soaks into the bisque-fired pot, and reduce the surface tension of the glaze so that it’s more willing to flow rather than just stick to itself. Once the first coat of glaze was dry, a second coat could be brushed on without disturbing the first coat. Tip: If you don’t have any of these materials on hand, a few drops of liquid dish soap added to a glaze can improve brushability by reducing the glaze’s surface tension. It won’t affect the durability of the dry glaze surface though. When brushing colored glazes over a raw base glaze, I found that CMC Gum, Apt-II, Spectrum Brushing Media, and Spectrum Glaze Thinner helped, as they dried more slowly and flowed smoothly.

Ceramic Glaze Additives for Dipping and Pouring

Bentonite and Veegum-T work well for dipping and pouring, as do Spectrum’s Glaze Thinner and Suspension Agent. The glazes required less stirring before use, and adhered well to the test tiles. For the glazes tested, CMC Gum, Apt-II, Spectrum Brushing Media, and Magma allowed for thicker glaze coatings when dipping. Glazes with Magma added to them can be built up into very thick coatings without chipping. All of these products are also suited for techniques that call for carving away glaze. Since they improve binding qualities of the raw glaze, the glaze coating is harder, and therefore the carved lines can be very precise.

CMC Gum Ceramic Glaze Additives 4Ceramic Glaze Additives for Re-glazing

Magma, CMC gum, and Spectrum Brushing Media helped when attempting to re-glaze an already glaze-fired piece. They worked even at room temperature; however, as they take a little while to dry, the process took longer and the coats tended to be thin. Glaze material did build up on the surface though, and so when pieces were pre-heated, the re-glazing process went faster and was an improvement over results without additives. Apt-II was the only product that enabled a thick layer of glaze to be applied in one coat to the surface of an already glaze-fired piece without pre-heating the piece. It’s an acrylic-based medium and so has different properties than the other three products tried, which are organic gums.

Conclusion

If you apply your glazes in a variety of ways, the best thing to do is to have a large container of your base glaze and pour some into smaller containers then mix in the appropriate additive for this smaller amount. If the larger glaze batch doesn’t behave well, you can then add a suspender/binder (and preservative if using an organic binder) to the mix.

We would like to thank Apt-II (www.apt2products.com), Brackers Good Earth Clays, supplier of Magma (www.brackers.com), and Spectrum Glazes (www.spectrumglazes.com), for supplying products for testing.

**First published in 2014
Comments
  • Shuli B.

    Sometimes adding water to a glaze can make the glaze crawl.

  • Genevieve N.

    If your glaze is too thick for pouring, why don’t you dilute it and add more water ????

  • Mike O.

    I use vgum-T to spray, cmc and VgumT for brushing and a couple of drops of glycerine for brushing. I do only macrocrystalline glazes and need 2 1/2 coats and w/o the glycerine it can cake up. 1% and 2drops in 400g. batch
    Mike

  • Judy L.

    I have an old pint bottle of sodium silicate that seems to have gotten stiff, but not hard. Is it still usable? It is about half-full. I was able to ‘pull out’ about a Tbsp. and added it to about 1.5 quarts of Laguna base glaze that previously seemed to hard pan quickly. When I mixed it in, the result did what I hoped for…to make it available for dipping. It doesn’t seem to have hard-panned since I mixed it in. I tested it on a few bowls and it seemed to work, but don’t know if I used too much or how log it ill last.

  • Nancy V.

    I wonder if you have any experience adding glycerine to glaze, or stains. thanks.

Enter Your Log In Credentials
This setting should only be used on your home or work computer.

Larger version of the image

Send this to a friend