Quick Tip: Extend Your Reach

After doing some touch-up painting in my kitchen, I realized that the mini paint roller I had been using would make a super easy sponge-on-a-stick tool to help reach into narrow or tall thrown pots.

For the prototype, I took a MacGyver approach; I jammed the roller sponge onto a paint brush handle (1), dipped it into water, squeezed it out, and it was good to go! This did the trick for a while, but I wanted a longer handle than that of my paint brush.

1 First version with roller attached to paintbrush.

2 Supplies including a dowel, waterproof adhesive, and foam roller.

For the second version, I used a 16-inch length of ¼-inch hardwood dowel and added a generous dollop of waterproof adhesive (E6000) to permanently attach the roller to the handle (see 2). The mini paint rollers have a plastic insert with a collar approximately 1 inch down that keeps the adhesive from running too far into the roller.

The high-density sponge rollers I used were from a dollar store and came 2 in a pack for $1.50. I have experimented with more expensive rollers, but they don’t work any better than the inexpensive ones. The standard roller size is 4×1¼ inches, but there are shorter and narrower ones available. Measure the inside diameter of the plastic insert to determine the dowel size you will need. Like all sponges, these need to be wetted then squeezed out to work well (3, 4). Both versions work brilliantly, and the cost and time spent making them is minimal, which is a welcome bonus.

3 Saturate and squeeze water out of roller before use.

4 In use, the dowel permits reaching into tall vessels on the wheel.

Comments

Leave a Reply

You must be logged in to post a comment.

Enter Your Log In Credentials
This setting should only be used on your home or work computer.

Larger version of the image
Send this to a friend