Quick Tip: Sponge Brush as Palette and Cleanup Tool

1 A brush overloaded with stain.

2 Use a sponge brush to clear excess stain off your brush.

I was recently working on a project that needed accented, inlaid lettering, as well as lettering brushed over top of slip using a commercial stain. Using a #1 and a #0 brush, I worked on a piece of bisqueware to practice. After trying unsuccessfully to paint neatly with a somewhat overloaded brush (1), I decided to unload some glaze from the brush by wiping it off onto a sponge, but it was too porous. I tried a sponge brush instead, and found that it worked well (2). I then removed a step by loading the sponge brush directly from the stain container and then loading my brush from that (3). This worked quite well, and with some practice, I was able to add the lettering to the pot.

The brush stroke in image 4 that is closest to the engraved numbers was made with an overloaded brush dipped into the jar of stain. The stroke to the right of that was made with a brush that has been loaded in the jar and then unloaded on the sponge brush. The next single stroke and the partial number 3 were made with the brush loaded from a sponge brush that has been dipped in the stain (4).

3 Load your brush directly from the loaded sponge brush.

4 Strokes made by the various loaded brushes.

5 Use a sponge brush to clean stain off the galleries for lids.

A sponge brush also works quite well to clean galleries of lids and pots. The hard handle that supports the sponge is firm enough to apply pressure to remove glaze from the gallery’s square corner (5).

Comments
  • I will be making use of your idea of using a sponge brush for cleaning the pot’s gallery. It is always awkward to clean and this seems to be a great solution. Thanks for the suggestion.

Leave a Reply

You must be logged in to post a comment.

Enter Your Log In Credentials
This setting should only be used on your home or work computer.

Larger version of the image

Send this to a friend